What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 18:33

There are two important concepts here.
what exactly is a ‘surge’ protector?
2024–10–16 [ OO OLAOYE OYEBODE ]
Rob Thomson ejected, Luzardo roughed up against Brewers - Phillies Nation
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The MOV will conduct when the voltage exceeds 50% of line voltage.
a photo is worth a thousand words.
A fuse is a non-resetable over current circuit protector.
Edit 2024–10.
Ryan Mountcastle To Miss 8-12 Weeks - MLB Trade Rumors
These devices are installed between the “hot” and “neutral” and protective ground.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
What have I done wrong? How can I start over?
At one ohm, the resistor has a maximum of 1 watt power.
But… the neutral is now “floating” because of the 1 ohm resistance.
What is lightning?
Was there a British ‘genocide’ of Aboriginal Australians?
nine
Here is a simplified AC power diagram.
The other is “what does a “fuse” do?”
The Law Firms That Appeased Trump—and Angered Their Clients - WSJ
First Sentence:
This is where the MOV conducts again, and dissipated the energy.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
BYD sells 382,476 NEVs in May, overseas sales hit new high - CnEVPost
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
What does a fuse do?
An AC voltage/ current source, and an ac inductive load.
Is there a possibility that we are living in a simulation and that there is a concept of rebirth?
It also is a device that limits the change in current flow.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Rocket Report: Northrop backs Firefly and names its rocket; Xodiac will fly no more - Ars Technica
Barnstars:
The bolt then partially travels down the line to your home.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Can you share some of your favorite jokes that are not well-known but always make people laugh?
[image of Common-mode choke]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
so, what happens?
Inside ‘Inside the NBA’ Transition to ESPN - Front Office Sports
Upvotes:
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
How do you write a letter to your uncle who sent you money for your birthday outfit?
For this case there are devices called Metal oxide varistors (MOV).
but this device (an Inductor) … impedes the rapid changes in the current.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Japanese Scientists Develop Artificial Blood Compatible With All Blood Types - Tokyo Weekender
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then describes the function of a fuse.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
A circuit breaker is similar, but is resettable.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
[old diagram got deleted by accident]
It seems Mohan does not understand the difference between a comment and an Answer.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
I post the exact comment here.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
One is “what exactly is in a ‘surge protector’ ? ”
At least they know the answer if they wanted it.
This device then solves the entire problem.
(Dc diagram shown, AC is similar).
In schematic diagrams this is the symbol for a fuse:
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
So, the voltage could go up to 500 volts, and the fuse will not open up.
The third is lightning and “how it gets conducted into a home.”
This is 'the assistant's answer'
But it can get overloaded, and no longer works.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
eight
This is where this question deviates from being a 'generic' question, and becomes more specific.
He then describes Rainy Season and Lightning.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
He then asserts :
but I think this circuit , shows a few more pieces.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–10[John johnson John Johnson ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Now when you have a certain ac resistance, then a current flows in a loop.
This one hit behind the barn.
Because the load is inductive, the current lags the voltage.(by a bit).
There are three different concepts here that are getting confused.
the problem then depends on "how fast does the fuse operate?".
One